Welcome to Dallas Pressure Washing Pros Window and Door Cleaning Service!

At Dallas Pressure Washing Pros, we believe clean windows and doors are the gateway to a brighter home or business! Our expert team is here to restore the shine and charm to your property, using gentle yet effective techniques to ensure every surface is spotless and safe.
From streak-free windows to grime-free doors, we’ll make sure your entryways are as inviting as they should be. Let’s bring back the sparkle--schedule your service today and see the difference!

We are eager to help!

What is the difference between pressure washing and soft washing for windows?

When it comes to cleaning your windows, it’s important to understand the difference between pressure washing and soft washing. Pressure washing uses high-pressure water to blast away dirt, debris, and stains. While effective for surfaces like driveways and decks, this method can be too harsh for windows, potentially damaging seals, frames, or even the glass itself if not used carefully. 


On the other hand, soft washing is a gentler approach. It uses low-pressure water combined with eco-friendly cleaning solutions to safely lift dirt and grime from windows without the risk of damage. Soft washing is ideal for windows, as it ensures a streak-free finish while preserving the integrity of your window seals and surrounding frames. At Dallas Pressure Washing Pros, we use soft washing techniques for window cleaning to deliver the best results without compromising safety.

Did you know that clean windows can actually improve your homes energy efficiency?

Windows that are covered in dirt and grime can block sunlight, making your home colder in the winter and requiring more energy to heat. In fact, studies have shown that clean windows allow up to 25% more sunlight to enter your home, helping to naturally warm it and potentially reduce energy costs. So, by regularly cleaning your windows and doors, you're not only enhancing your home's curb appeal but also contributing to better energy efficiency!

Window and Door Pressure Washing Q&A

Can windows and door be power washed safely?

Yes, windows and doors can be pressure washed, but it requires caution and the right techniques to avoid damage. Here’s what to know:
Windows

• Special Care Needed: The high pressure can damage the glass or seals around the windows if done incorrectly. A professional will use a lower-pressure setting or specialized equipment to clean windows safely.
• Detergents & Tools: Soft washing, which uses low-pressure water combined with eco-friendly detergents, is often the preferred method for windows.
• Benefits: This method effectively removes dirt, mold, and streaks, leaving windows spotless and streak-free.

Doors

• Safe Practices: Most exterior doors, including metal, fiberglass, or wood, can be pressure washed, but the pressure should be adjusted based on the material. Avoid high pressure directly on seals, hinges, or decorative details.
• Focus Areas: Pressure washing can remove dirt, cobwebs, and grime from door surfaces and surrounding frames.

Why Choose Professionals?Hiring pressure washing experts ensures your windows and doors are cleaned without the risk of cracks, water intrusion, or damage to their finish. Hicksville Pressure Washing uses specialized tools and techniques to clean these areas safely and efficiently.
Want us to take care of your windows and doors?  

Contact us today for expert cleaning!

Did you know that regularly pressure washing your windows and doors can extend their lifespan by up to 5 years?

Dirt, grime, and contaminants like mold and mildew can build up over time, causing wear and tear on your doors and windows. Pressure washing helps to remove these harmful substances, preventing them from deteriorating the materials and ensuring your windows and doors remain in great condition for years to come. Regular cleaning also helps maintain their appearance, boosting your home’s curb appeal!

When washing windows, different types of cleaning solutions and chemicals are used to ensure a streak-free, spotless finish while maintaining the safety of the window surfaces.

Here are some common types of chemicals used:​

Glass Cleaner

• Description: A basic window cleaner specifically designed for glass surfaces. These cleaners are often ammonia-based or alcohol-based and are great for removing light dirt, dust, and smudges. They evaporate quickly, leaving a streak-free finish.
• Common Use: Regular cleaning of windows with light dirt or fingerprints.

Eco-Friendly/Non-Toxic Cleaners

• Description: Environmentally friendly window cleaners that use natural ingredients like vinegar, baking soda, or citrus-based solutions. These are often less harsh than chemical cleaners and are ideal for those looking to avoid toxins.
• Common Use: Residential or eco-conscious customers seeking non-toxic alternatives.

Degreasers

• Description: These cleaners are designed to cut through oily residues, sticky substances, and other tough grime that can accumulate on windows, particularly in kitchens or areas near cooking surfaces.
• Common Use: Windows with heavy buildup from oils, cooking vapors, or industrial sites.

​Ammonia-Based Cleaners

• Description: Ammonia is a common ingredient in glass cleaners due to its ability to break down grease and grime. It’s effective in removing hard water stains and provides a streak-free shine.
• Common Use: Commercial or residential windows with stubborn dirt, fingerprints, and smudges.

​Alkaline Cleaners

• Description: These are strong cleaners that are particularly effective at breaking down mineral deposits, such as hard water stains, that can accumulate on glass. They are often used for more heavy-duty jobs.
• Common Use: Hard water stains or mineral buildup, especially on windows exposed to rain or irrigation systems.

​Surfactant-Based Cleaners

• Description: These cleaners contain surfactants, which reduce the surface tension of water, allowing it to better spread and cling to surfaces. This helps to loosen dirt and grime, making it easier to remove.
• Common Use: General window cleaning for regular maintenance, especially in residential settings.

Hydrofluoric Acid-Based Cleaners (for Commercial Use)

• Description: A very strong acid that can dissolve mineral deposits and cement-based stains. It’s typically used for commercial cleaning when dealing with very tough mineral or lime deposits.
• Common Use: Industrial or commercial properties with severe mineral buildup, but it’s generally used by professionals due to its dangerous nature.

Vinegar Solution

• Description: A simple, natural cleaning solution made from a mixture of vinegar and water. This solution is effective for general window cleaning and is often used in eco-friendly cleaning services.
• Common Use: Residential window cleaning for regular upkeep with an eco-friendly approach.

Did you know that pressure washing can remove up to 99.9% of allergens and bacteria from windows and doors?

Over time, windows and doors can harbor pollen, mold spores, and other allergens that can affect indoor air quality. Professional pressure washing not only restores their appearance but also removes these harmful contaminants, creating a healthier living environment for you and your family. This makes it especially beneficial during allergy seasons or in areas with high humidity, where mold and mildew are more likely to develop.

Can pressure washing remove mold or mildew from door and windows?

Yes, pressure washing can effectively remove mold and mildew from windows and doors when done correctly. Mold and mildew thrive in damp, shaded areas and can often accumulate on window frames, sills, and door surfaces, creating unsightly stains and potentially causing health issues.

Professional pressure washing uses a combination of controlled water pressure and specialized cleaning solutions to eliminate mold and mildew at the root. For delicate areas like windows, soft washing is typically preferred. This involves using low-pressure water combined with eco-friendly, mold-killing detergents to safely clean the surface without damaging the glass, seals, or frames.
​
By removing mold and mildew, pressure washing not only restores the appearance of your windows and doors but also helps improve air quality and prevents further growth. For a thorough and safe cleaning, it’s always best to trust experienced professionals like Dallas Pressure Washing Pros.

Do I need to prepare my home before scheduling a power cleaning service for windows and doors?

Preparing your home for a window cleaning service is simple and helps ensure the process goes smoothly. Here are a few steps to get your home ready:

Clear the Area Around Windows
Move any furniture, decorations, or plants away from the windows inside and outside your home. This provides easy access for the cleaners and protects your belongings from water spray or cleaning solutions.

Close and Lock Windows
Ensure all windows are securely closed and locked before the cleaning begins. This prevents any water or cleaning solution from seeping inside your home.

Remove Window Screens
If your windows have screens, remove them beforehand, if possible. Many professional services, like Dallas Pressure Washing Pros, can also clean the screens, so ask if this is included in your service.

Inform the Cleaners About Special Concerns
Let the cleaning team know about any specific issues, such as cracked glass, loose frames, or areas of concern. This helps them tailor their approach to your needs and avoid further damage.

Secure Pets and Children
If you have pets or children, keep them in a safe area during the cleaning to avoid interruptions or safety risks while the team works.

​By taking these simple steps, you’ll make the process easier for both you and the cleaning professionals, ensuring your windows are cleaned quickly and efficiently!

Here's an interesting fact: